Search
Search Criteria
Items meeting the search criteria
Stock: 34
Model: TCAC0001
UPC: 6009515814908
Morse Taper to Weldon adaptor
MT3 to Weldon Adaptor
Morse Taper 3 adaptor that accept cutters with a 3/4 inch Weldon shank....
R 1,168.52
Ex VAT:R 1,016.10
Stock: 28
Model: TCAC0002
UPC: 6009515819873
Morse Taper to Weldon adaptor
MT2 to Weldon Adaptor
Morse Taper 2 adaptor that accept cutters with a 3/4 inch Weldon shank....
R 1,333.43
Ex VAT:R 1,159.50
Stock: 1713
Model: TCAC0004
UPC: 6009515814915
Annular Cutter Pilot Pin
6.3 mm Pilot Pin for
30 mm Annular Cutters
Pilot pin with length of 79 mm specifically for annular cutters (broach
cutters) with a cutting length of 30 mm.
....
R 34.06
Ex VAT:R 29.62
Stock: 1452
Model: TCAC0005
UPC: 6009515814922
Annular Cutter Pilot Pin
6.3 mm Pilot Pin for
55 mm Annular Cutters
Pilot pin with length of 102 mm specifically for annular cutters (broach
cutters) with a cutting length of 55 mm.
....
R 44.03
Ex VAT:R 38.29
Stock: 955
Model: TCAC014-2
UPC: 6009515814465
Annular Cutters 55mm long
Annular Cutter: &O/; 14
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to mak..
R 453.62
Ex VAT:R 394.45
Stock: 395
Model: TCAC016-2
UPC: 6009515814519
Annular Cutters 55mm long
Annular Cutter: &O/; 16
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to mak..
R 515.49
Ex VAT:R 448.25
Stock: 993
Model: TCAC018-1
UPC: 6009515814540
Annular Cutters 30mm
Annular Cutter: &O/; 18
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make ho..
R 411.01
Ex VAT:R 357.40
Stock: 120
Model: TCAC019-1
UPC: 6009515814564
Annular Cutters 30mm
Annular Cutter: &O/; 19
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make ho..
R 419.23
Ex VAT:R 364.55
Stock: 381
Model: TCAC024-2
UPC: 6009515814656
Annular Cutters 55mm long
Annular Cutter: &O/; 24
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to mak..
R 749.17
Ex VAT:R 651.45
Stock: 140
Model: TCAC027-2
UPC: 6009515814717
Annular Cutters 55mm long
Annular Cutter: &O/; 27
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to mak..
R 925.55
Ex VAT:R 804.83
Stock: 163
Model: TCAC028-1
UPC: 6009515814724
Annular Cutters 30mm
Annular Cutter: &O/; 28
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make ho..
R 584.20
Ex VAT:R 508.00
Stock: 284
Model: TCAC032-1
UPC: 6009515814786
Annular Cutters 30mm
Annular Cutter: &O/; 32
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make ho..
R 795.92
Ex VAT:R 692.10
Stock: 34
Model: TCAC032-2
UPC: 6009515814793
Annular Cutters 55mm long
Annular Cutter: &O/; 32
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to mak..
R 840.31
Ex VAT:R 730.70
Stock: 34
Model: TCAC033-2
UPC: 6009515814816
Annular Cutters 55mm long
Annular Cutter: &O/; 33
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to mak..
R 927.88
Ex VAT:R 806.85
Stock: 76
Model: TCAC035-1
UPC: 6009515814823
Annular Cutters 30mm
Annular Cutter: &O/; 35
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make ho..
R 845.42
Ex VAT:R 735.15
Stock: 1
Model: TCAC035-2
UPC: 6009515814830
Annular Cutters 55mm long
Annular Cutter: &O/; 35
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to mak..
R 1,098.37
Ex VAT:R 955.10
Stock: 32
Model: TCAC038-2
UPC: 6009515814878
Annular Cutters 55mm long
Annular Cutter: &O/; 38
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to mak..
R 1,397.57
Ex VAT:R 1,215.28
Stock: 88
Model: TCAC040-2
UPC: 6009515814892
Annular Cutters 55mm long
Annular Cutter: &O/; 40
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to mak..
R 1,373.27
Ex VAT:R 1,194.15
Stock: 28
Model: TCAC042-1
UPC: 6009515828400
Annular Cutters 30mm
Annular Cutter: &O/; 42
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make ho..
R 1,264.60
Ex VAT:R 1,099.65
Stock: 13
Model: TCAC045-1
UPC: 6009515828424
Annular Cutters 30mm
Annular Cutter: &O/; 45
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make ho..
R 1,340.27
Ex VAT:R 1,165.45
Stock: 3
Model: TCAC046-1
UPC: 6009515828431
Annular Cutters 30mm
Annular Cutter: &O/; 46
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make ho..
R 1,527.90
Ex VAT:R 1,328.61
Stock: 28
Model: TCAC050-2
UPC: 6009515818968
Annular Cutters 55mm long
Annular Cutter: &O/; 50
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to mak..
R 2,277.33
Ex VAT:R 1,980.29
Stock: 18
Model: TCAC0005-04
UPC: 6009515897833
Tork Craft Pilot Pin for TCT Cutters — 18-102 mm × 50 mm (Model TCAC0005-04)
The Tork Craft TCAC0005-04 pilot pin is designed for use with tungsten-carbide tipped (TCT) annular cutters sized from 18 mm
up to 102 mm in diameter, supporting a 50 mm cutting depth. The robust 7.9 mm × 108 mm shank e..
R 101.27
Ex VAT:R 88.06
Stock: 487
Model: TCAC012-2
UPC: 6009515814434
Annular Cutters 55mm long
Annular Cutter: &O/; 12 mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make ho..
R 481.71
Ex VAT:R 418.88
Stock: 256
Model: TCAC013-2
UPC: 6009515814472
Annular Cutters 55mm long
Annular Cutter: &O/; 13
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to mak..
R 481.71
Ex VAT:R 418.88
Stock: 936
Model: TCAC014-1
UPC: 6009515814458
Annular Cutters 30mm
Annular Cutter: &O/; 14
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make ho..
R 364.26
Ex VAT:R 316.75
Stock: 228
Model: TCAC015-1
UPC: 6009515814489
Annular Cutters 30mm
Annular Cutter: &O/; 15
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make ho..
R 345.58
Ex VAT:R 300.50
Stock: 285
Model: TCAC017-2
UPC: 6009515814533
Annular Cutters 55mm long
Annular Cutter: &O/; 17
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to mak..
R 507.27
Ex VAT:R 441.10
Stock: 490
Model: TCAC020-1
UPC: 6009515814588
Annular Cutters 30mm
Annular Cutter: &O/; 20
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make ho..
R 457.99
Ex VAT:R 398.25
Stock: 30
Model: TCAC021-1
UPC: 6009515814601
Annular Cutters 30mm
Annular Cutter: &O/; 21
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make ho..
R 460.52
Ex VAT:R 400.45
Stock: 197
Model: TCAC021-2
UPC: 6009515814618
Annular Cutters 55mm long
Annular Cutter: &O/; 21 mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make ho..
R 611.74
Ex VAT:R 531.95
Stock: 1161
Model: TCAC022-2
UPC: 6009515814632
Annular Cutters 55mm long
Annular Cutter: &O/; 22
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to mak..
R 644.69
Ex VAT:R 560.60
Stock: 122
Model: TCAC023-1
UPC: 6009515817510
Annular Cutters 30mm
Annular Cutter: &O/; 23
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make ho..
R 507.50
Ex VAT:R 441.30
Stock: 38
Model: TCAC023-2
UPC: 6009515817527
Annular Cutters 55mm long
Annular Cutter: &O/; 23
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to mak..
R 685.98
Ex VAT:R 596.50
Stock: 442
Model: TCAC026-1
UPC: 6009515814687
Annular Cutters 30mm
Annular Cutter: &O/; 26
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make ho..
R 641.07
Ex VAT:R 557.45
Stock: 191
Model: TCAC026-2
UPC: 6009515814694
Annular Cutters 55mm long
Annular Cutter: &O/; 26
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to mak..
R 804.20
Ex VAT:R 699.30
Stock: 119
Model: TCAC030-2
UPC: 6009515814755
Annular Cutters 55mm long
Annular Cutter: &O/; 30
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to mak..
R 892.17
Ex VAT:R 775.80
Stock: 36
Model: TCAC031-1
UPC: 6009515814762
Annular Cutters 30mm
Annular Cutter: &O/; 31
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make ho..
R 833.08
Ex VAT:R 724.42
Stock: 32
Model: TCAC033-1
UPC: 6009515814809
Annular Cutters 30mm
Annular Cutter: &O/; 33
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make ho..
R 804.20
Ex VAT:R 699.30
Stock: 31
Model: TCAC036-1
UPC: 6009515814847
Annular Cutters 30mm
Annular Cutter: &O/; 36
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make ho..
R 864.63
Ex VAT:R 751.85
Stock: 147
Model: TCAC036-2
UPC: 6009515814854
Annular Cutters 55mm long
Annular Cutter: &O/; 36
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to mak..
R 1,208.31
Ex VAT:R 1,050.70
Stock: 33
Model: TCAC038-1
UPC: 6009515814861
Annular Cutters 30mm
Annular Cutter: &O/; 38 mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes ..
R 1,060.29
Ex VAT:R 921.99
Stock: 15
Model: TCAC044-1
UPC: 6009515828417
Annular Cutters 30mm
Annular Cutter: &O/; 44
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make ho..
R 1,425.76
Ex VAT:R 1,239.79
Stock: 23
Model: TCAC044-2
UPC: 6009515828462
Annular Cutters 55mm long
Annular Cutter: &O/; 44
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to mak..
R 1,813.23
Ex VAT:R 1,576.72
Stock: 29
Model: TCAC045-2
UPC: 6009515828479
Annular Cutters 55mm long
Annular Cutter: &O/; 45
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to mak..
R 1,783.29
Ex VAT:R 1,550.69
Stock: 187
Model: TCAC0005-01
UPC: 6009515897802
Tork Craft Pilot Pin for TCT Cutters — 12–17 mm × 55 mm (Model TCAC0005-01)
The Tork Craft TCAC0005-01 pilot pin is designed for use with TCT annular cutters ranging from 12 to 17 mm in diameter and 55 mm cutting depth. This precision-ground pilot pin guides the cutter for perfect centering and fac..
R 109.31
Ex VAT:R 95.05
Stock: 19
Model: TCAC0005-02
UPC: 6009515897819
Tork Craft Pilot Pin for TCT Cutters — 18–102 mm × 35 mm (Model TCAC0005-02)
The Tork Craft TCAC0005-02 pilot pin is designed for tungsten-carbide tipped (TCT) annular cutters sized from 18 mm up to 102 mm diameter, supporting a 35 mm cutting depth. The robust 7.9 mm × 90 mm shank provides secure e..
R 104.08
Ex VAT:R 90.50
Stock: 125
Model: TCAC0005-03
UPC: 6009515897826
Tork Craft Pilot Pin for TCT Cutters — 12–17 mm × 35 mm (Model TCAC0005-03)
The Tork Craft TCAC0005-03 pilot pin is engineered for use with TCT (tungsten carbide tipped) annular cutters sized 12 mm to 17 mm diameter and 35 mm cutting depth. The strong 6.3 mm × 90 mm shank ensures compatibility with..
R 72.28
Ex VAT:R 62.85
Stock: 561
Model: TCAC012-1
UPC: 6009515814427
Tork Craft Annular Hole Cutter — TCT, 12 × 30 mm, Weldon Shank 19.05 mm (Model TCAC012-1)
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome. ..
R 373.39
Ex VAT:R 324.69
Stock: 212
Model: TCAC013-1
UPC: 6009515814441
Annular Cutters 30mm
Annular Cutter: &O/; 13
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make ho..
R 364.26
Ex VAT:R 316.75
Showing 0 to 0 of 0 (0 Pages)
Information
No Search criteria specified