Search
Search Criteria
Items meeting the search criteria
Stock: 38
Model: TCAC012-2
UPC: 6009515814434
Annular Cutters 55mm long
Annular Cutter: &O/; 12 mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make ho..
R 481.71
Ex VAT:R 418.88
Stock: 146
Model: TCAC013-2
UPC: 6009515814472
Annular Cutters 55mm long
Annular Cutter: &O/; 13
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to mak..
R 481.71
Ex VAT:R 418.88
Stock: 444
Model: TCAC014-1
UPC: 6009515814458
Annular Cutters 30mm
Annular Cutter: &O/; 14
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make ho..
R 364.26
Ex VAT:R 316.75
Stock: 113
Model: TCAC015-1
UPC: 6009515814489
Annular Cutters 30mm
Annular Cutter: &O/; 15
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make ho..
R 345.58
Ex VAT:R 300.50
Stock: 137
Model: TCAC017-2
UPC: 6009515814533
Annular Cutters 55mm long
Annular Cutter: &O/; 17
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to mak..
R 507.27
Ex VAT:R 441.10
Stock: 125
Model: TCAC020-1
UPC: 6009515814588
Annular Cutters 30mm
Annular Cutter: &O/; 20
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make ho..
R 457.99
Ex VAT:R 398.25
Stock: 102
Model: TCAC021-1
UPC: 6009515814601
Annular Cutters 30mm
Annular Cutter: &O/; 21
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make ho..
R 460.52
Ex VAT:R 400.45
Stock: 109
Model: TCAC021-2
UPC: 6009515814618
Annular Cutters 55mm long
Annular Cutter: &O/; 21 mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make ho..
R 611.74
Ex VAT:R 531.95
Stock: 529
Model: TCAC022-2
UPC: 6009515814632
Annular Cutters 55mm long
Annular Cutter: &O/; 22
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to mak..
R 644.69
Ex VAT:R 560.60
Stock: 128
Model: TCAC023-1
UPC: 6009515817510
Annular Cutters 30mm
Annular Cutter: &O/; 23
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make ho..
R 507.50
Ex VAT:R 441.30
Stock: 87
Model: TCAC023-2
UPC: 6009515817527
Annular Cutters 55mm long
Annular Cutter: &O/; 23
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to mak..
R 685.98
Ex VAT:R 596.50
Stock: 150
Model: TCAC026-1
UPC: 6009515814687
Annular Cutters 30mm
Annular Cutter: &O/; 26
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make ho..
R 641.07
Ex VAT:R 557.45
Stock: 85
Model: TCAC026-2
UPC: 6009515814694
Annular Cutters 55mm long
Annular Cutter: &O/; 26
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to mak..
R 804.20
Ex VAT:R 699.30
Stock: 62
Model: TCAC030-2
UPC: 6009515814755
Annular Cutters 55mm long
Annular Cutter: &O/; 30
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to mak..
R 892.17
Ex VAT:R 775.80
Stock: 55
Model: TCAC031-1
UPC: 6009515814762
Annular Cutters 30mm
Annular Cutter: &O/; 31
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make ho..
R 833.08
Ex VAT:R 724.42
Stock: 28
Model: TCAC033-1
UPC: 6009515814809
Annular Cutters 30mm
Annular Cutter: &O/; 33
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make ho..
R 804.20
Ex VAT:R 699.30
Stock: 51
Model: TCAC036-1
UPC: 6009515814847
Annular Cutters 30mm
Annular Cutter: &O/; 36
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make ho..
R 864.63
Ex VAT:R 751.85
Stock: 18
Model: TCAC036-2
UPC: 6009515814854
Annular Cutters 55mm long
Annular Cutter: &O/; 36
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to mak..
R 1,208.31
Ex VAT:R 1,050.70
Stock: 83
Model: TCAC038-1
UPC: 6009515814861
Annular Cutters 30mm
Annular Cutter: &O/; 38 mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes ..
R 1,060.29
Ex VAT:R 921.99
Stock: 12
Model: TCAC044-1
UPC: 6009515828417
Annular Cutters 30mm
Annular Cutter: &O/; 44
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make ho..
R 1,425.76
Ex VAT:R 1,239.79
Stock: 18
Model: TCAC044-2
UPC: 6009515828462
Annular Cutters 55mm long
Annular Cutter: &O/; 44
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to mak..
R 1,813.23
Ex VAT:R 1,576.72
Stock: 46
Model: TCAC045-2
UPC: 6009515828479
Annular Cutters 55mm long
Annular Cutter: &O/; 45
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to mak..
R 1,783.29
Ex VAT:R 1,550.69
Stock: 17
Model: TCAC0001
UPC: 6009515814908
Morse Taper to Weldon adaptor
MT3 to Weldon Adaptor
Morse Taper 3 adaptor that accept cutters with a 3/4 inch Weldon shank
What is a Weldon Shank?
The term comes from the Weldomn Tool Company. The Weldon shank was the first straight shank with a locking drive flat....
R 1,168.52
Ex VAT:R 1,016.10
Stock: 8
Model: TCAC0002
UPC: 6009515819873
Morse Taper to Weldon adaptor
MT2 to Weldon Adaptor
Morse Taper 2 adaptor that accept cutters with a 3/4 inch Weldon shank
What is a Weldon Shank?
The term comes from the Weldomn Tool Company. The Weldon shank was the first straight shank with a locking drive f....
R 1,333.43
Ex VAT:R 1,159.50
Stock: 1458
Model: TCAC0004
UPC: 6009515814915
Annular Cutter Pilot Pin
6.3 mm Pilot Pin for
30 mm Annular Cutters
Pilot pin with length of 79 mm specifically for annular cutters (broach
cutters) with a cutting length of 30 mm.
....
R 34.06
Ex VAT:R 29.62
Stock: 2029
Model: TCAC0005
UPC: 6009515814922
Annular Cutter Pilot Pin
6.3 mm Pilot Pin for
55 mm Annular Cutters
Pilot pin with length of 102 mm specifically for annular cutters (broach
cutters) with a cutting length of 55 mm.
....
R 44.03
Ex VAT:R 38.29
Stock: 353
Model: TCAC014-2
UPC: 6009515814465
Annular Cutters 55mm long
Annular Cutter: &O/; 14
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to mak..
R 453.62
Ex VAT:R 394.45
Stock: 99
Model: TCAC016-2
UPC: 6009515814519
Annular Cutters 55mm long
Annular Cutter: &O/; 16
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to mak..
R 515.49
Ex VAT:R 448.25
Stock: 85
Model: TCAC018-1
UPC: 6009515814540
Annular Cutters 30mm
Annular Cutter: &O/; 18
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make ho..
R 411.01
Ex VAT:R 357.40
Stock: 42
Model: TCAC019-1
UPC: 6009515814564
Annular Cutters 30mm
Annular Cutter: &O/; 19
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make ho..
R 419.23
Ex VAT:R 364.55
Stock: 46
Model: TCAC024-2
UPC: 6009515814656
Annular Cutters 55mm long
Annular Cutter: &O/; 24
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to mak..
R 749.17
Ex VAT:R 651.45
Stock: 50
Model: TCAC027-2
UPC: 6009515814717
Annular Cutters 55mm long
Annular Cutter: &O/; 27
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to mak..
R 925.55
Ex VAT:R 804.83
Stock: 105
Model: TCAC028-1
UPC: 6009515814724
Annular Cutters 30mm
Annular Cutter: &O/; 28
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make ho..
R 584.20
Ex VAT:R 508.00
Stock: 161
Model: TCAC032-1
UPC: 6009515814786
Annular Cutters 30mm
Annular Cutter: &O/; 32
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make ho..
R 795.92
Ex VAT:R 692.10
Stock: 193
Model: TCAC032-2
UPC: 6009515814793
Annular Cutters 55mm long
Annular Cutter: &O/; 32
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to mak..
R 840.31
Ex VAT:R 730.70
Stock: 64
Model: TCAC033-2
UPC: 6009515814816
Annular Cutters 55mm long
Annular Cutter: &O/; 33
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to mak..
R 927.88
Ex VAT:R 806.85
Stock: 72
Model: TCAC035-1
UPC: 6009515814823
Annular Cutters 30mm
Annular Cutter: &O/; 35
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make ho..
R 845.42
Ex VAT:R 735.15
Stock: 53
Model: TCAC035-2
UPC: 6009515814830
Annular Cutters 55mm long
Annular Cutter: &O/; 35
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to mak..
R 1,098.37
Ex VAT:R 955.10
Stock: 93
Model: TCAC038-2
UPC: 6009515814878
Annular Cutters 55mm long
Annular Cutter: &O/; 38
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to mak..
R 1,397.57
Ex VAT:R 1,215.28
Stock: 70
Model: TCAC040-2
UPC: 6009515814892
Annular Cutters 55mm long
Annular Cutter: &O/; 40
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to mak..
R 1,373.27
Ex VAT:R 1,194.15
Stock: 29
Model: TCAC042-1
UPC: 6009515828400
Annular Cutters 30mm
Annular Cutter: &O/; 42
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make ho..
R 1,264.60
Ex VAT:R 1,099.65
Stock: 7
Model: TCAC045-1
UPC: 6009515828424
Annular Cutters 30mm
Annular Cutter: &O/; 45
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make ho..
R 1,340.27
Ex VAT:R 1,165.45
Stock: 4
Model: TCAC046-1
UPC: 6009515828431
Annular Cutters 30mm
Annular Cutter: &O/; 46
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make ho..
R 1,527.90
Ex VAT:R 1,328.61
Stock: 27
Model: TCAC050-2
UPC: 6009515818968
Annular Cutters 55mm long
Annular Cutter: &O/; 50
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to mak..
R 2,277.33
Ex VAT:R 1,980.29
Stock: 174
Model: TCAC012-1
UPC: 6009515814427
Annular Cutters 30mm
Annular Cutter: &O/; 12 mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes ..
R 373.39
Ex VAT:R 324.69
Stock: 145
Model: TCAC013-1
UPC: 6009515814441
Annular Cutters 30mm
Annular Cutter: &O/; 13
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make ho..
R 364.26
Ex VAT:R 316.75
Stock: 61
Model: TCAC015-2
UPC: 6009515814496
Annular Cutters 55mm long
Annular Cutter: &O/; 15
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to mak..
R 460.52
Ex VAT:R 400.45
Stock: 124
Model: TCAC016-1
UPC: 6009515814502
Annular Cutters 30mm
Annular Cutter: &O/; 16
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make ho..
R 391.35
Ex VAT:R 340.30
Stock: 290
Model: TCAC017-1
UPC: 6009515814526
Annular Cutters 30mm
Annular Cutter: &O/; 17
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make ho..
R 409.63
Ex VAT:R 356.20
Stock: 399
Model: TCAC018-2
UPC: 6009515814557
Annular Cutters 55mm long
Annular Cutter: &O/; 18
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to mak..
R 590.03
Ex VAT:R 513.07
Showing 0 to 0 of 0 (0 Pages)
Information
No Search criteria specified