Wahser & Lock Lever Kit (6/8-12 & 23-25) For Tc20321

Extra Information

• These spare parts are for the Tork Craft TC20321 Circular Saw Brushless 20V 165mm Blade CS165B Cordless – check the model number on your saw before ordering.
• Ideal when the base or guard locks are difficult to tighten, slip under load, or when original washers and small hardware are lost or badly worn.
• Use the TC20321 exploded view to identify parts 6, 8–12 and 23–25 and to guide disassembly and re-assembly of the lock areas.
• Combine with other TC20321 spare kits (such as shell, washer & gear or depth bracket kits) if you are doing a more complete refurbishment.
• Barcode / UPC: 6009515899639 – useful for stock control, labelling and barcode scanning in your system.

Features

• Genuine Tork Craft spare kit – Original washers and lock lever hardware for the TC20321 circular saw.
• Covers items 6/8–12/23–25 – Includes a matched group of small parts used in the base and locking mechanisms.
• Designed for CS165B 20V saw – Correct fit for the TC20321 Circular Saw Brushless 20V 165mm Blade CS165B Cordless.
• Matched spacing and clamping – Washers and lever components are selected to work together as intended by the factory.
• Compact, service-friendly pack – Convenient kit for workshop repairs and maintenance of a well-used saw.

Benefits

• Restore positive locking: Fresh washers and lever hardware help bevel and depth locks bite firmly again.
• Improve accuracy and feel: Tight, predictable adjustments make it easier to dial in repeatable cutting settings.
• Reduce unwanted movement: Correct clamping pressure helps stop the base slipping during a cut.
• Extend tool lifespan: Replacing small consumable parts protects the main body and mechanisms from further wear.
• Keep your 20V system productive: Maintain a trusted TC20321 saw instead of replacing the entire tool.

Safety

• Always remove the 20 V battery pack from the circular saw before working on the base, locks or any internal components.
• Keep small washers, springs and levers organised on the bench to avoid mixing parts during re-assembly.
• After re-fitting the kit, check that all base, bevel and depth adjustments move freely and lock securely before cutting.
• With the battery still removed, move the saw through its full range of adjustments to ensure nothing fouls the blade or guard.
• Test the saw at no-load first and stop immediately if there is any unusual movement, noise or vibration from the base or lock areas.

Specifications